Basic Boat Info
Price: $33,000
Make: Mako
Model: 21 LTS
Year: 2015
Condition: Used
Category: Power
Construction: Fiberglass
Boat Hull ID: BUJ48251I415
Has Hull ID: Yes
Dimensions
Length: 21 ft
Length Overall: 21 ft
Beam: 8'4 ft
Min Draft: 1 ft
Dry Weight: 2,100 lb
Deadrise: 20 °
Engines / Speed
Engines: 1
- Make: Mercury
- Model: 150 XL
- Fuel: Unleaded
- Engine Power: 150hp
- Type: Outboard 4 Stroke
- Propeller Type: 3 Blade, Stainless Steel
- Year: 2015
Tanks
Fuel Tanks: 1
Fuel Tank Capacity: 56 gal
Fuel Tank Material: Plastic
Contact
Ken Main II
Let me help you find the right boat , whether buying or selling I can get it done for you.
GULF SHORES MARINA LLC
Office
Gulf Shores Marina LLC
2072 DAVIS BLVD.
Naples, Florida, US, 34104
Tel:(239) 774-0222
2072 DAVIS BLVD.
Naples, Florida, US, 34104
Tel:(239) 774-0222
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Pricing Details
2015 Mako 21 LTS w/ 150 XL OptiMax Pro XS and Trailer
Price: 33,000 USD
Your Price: 33,000 USD
Additional Specs
- Length: 21'
- Max. recommended HP: 225 HP
- Fuel capacity: 56 Gallons
- Deadrise: 16 Degrees
- Draft: 12"
- Beam: 8' 4''
- Approx. weight: 2100 Lbs.
- Approx. package weight: 3310 Lbs.
- Max. person capacity: 7 Persons
- Max. weight capacity: 2100 Lbs.
- Max. person weight: 1100 Lbs.
- Transom height at center line: 27"
Standard Features
Comfort, Convenience & Peace of Mind
- MAKO ASSURANCE best-in-class warranty: limited lifetime structural warranty + 5-year stem-to-stern warranty + 3-year gelcoat warranty + transferable to a second owner
- NMMA Certified
- Factory leak tested for hull, plumbing & fitting integrity
- Stainless steel hardware & fasteners for corrosion resistance
- Fire extinguisher
- Horn
Console(s)
- Teleflex® hydraulic steering w/tilt wheel
- Stainless steel destroyer-style steering wheel
- 20.25" (51.44 cm) tall contoured, tinted acrylic windscreen
- Analog tachometer, fuel gauge & water pressure gauge
- Area to flush- & surface-mount additional electronics
- Binnacle-mounted remote engine control w/power trim switch
- Dual battery switch & single battery rigging
- Heavy-duty anodized aluminum grab rail
- Brushed aluminum grab rail
- Hinged backrest cushion on front of console w/concealed 2-tray tackle storage for
- Plano 3600 Series boxes
- Removable 72-qt. (68.14 L) forward-console cooler/seat w/integrated cushion
- Toe kick
- 2 stainless steel drink holders w/drainage system
- 6 anodized aluminum vertical rod holders
Construction & Exterior
- Aluminum backing plates laminated into bow & stern decks to accomodate fore & aft casting seat installations
- Composite seat substrates
- Encapsulated transom fiberglass-infused, high-density composite core
- Fully molded composite deck w/integrated bow & stern casting platforms
- Hand-laid hull, deck & stringer system chemically bonded for strength & durability
- Helm seating & console mechanically fastened & chemically bonded to high-density composite core & .25" (.64 cm) aluminum backing plates
- High-density, fiberglass-infused trolling motor mounting core
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/stainless steel fasteners
- Integrated 1-piece molded fiberglass stringer grid system w/gelcoat finish & fully injected, closed-cell foam flotation
- MAKO® White gelcoat
- Marine-grade stainless steel hardware throughout
- Molded, patterned non-skid deck, cockpit sole & gunwales
- Non-marring vinyl rub rail
- Self-bailing cockpit
Electrical, Mechanical & Plumbing Systems
- 1,000 GPH (3,785.41 LPH) cartridge livewell pump w/auxiliary inlet port
- 1,600 GPH (6,056.66 LPH) bilge pump w/auto switch
- EPA-compliant fuel system w/rotocast corrosion-free fuel tank
- 6-circuit ATO/ATC distribution fuse block
- Engraved switch panel w/rocker switches & push-to-reset circuit breakers
- High-speed raw water pickup
- Interstate® cranking battery w/tray
- Marine-grade tinned wiring w/submersible connectors
- Self-bailing cockpit w/removable deck drain screens
- USCG-compliant navigation lights
- 2 cockpit courtesy lights
- 12V accessory outlet
Hardware & Accessories
- Seven 6" (15.24 cm) stainless steel low-profile pull-up cleats (fore, spring & aft)
- Powder-coated transom reinforcement plate w/MAKO® logo
- Reboarding step & stainless steel grab handle
- Stainless steel & bronze thru-hull fittings
- Stainless steel bow & stern eyes
- Stainless steel fuel fill & vent fittings
Interior
- NEW 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- 136-qt. (128.70 L) center bow storage compartment w/locking stainless steel compression latch
- 2 large aft guttered & gasketed lock-down dry storage compartments
- 90-qt. (85.17 L) port bow box w/stainless steel compression latch
- 90-qt. (85.17 L) starboard bow rod box w/stainless steel compression latch
- Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) "food & drink" cooler w/integrated seat cushion
- Closed-molded coaming boards
- Closed-molded laminate hatch covers w/finished undersides
- 30-gal. (113.56 L) aft livewell w/Pro-Air® aeration system
- 360° fishability
- Removable bow cast net storage tub
- Removable stern seat/livewell cushion
- Anchor locker
Performance
- Award-winning Rapid Planing System transom for quicker holeshots, shallow-water abilities & better overall performance
- Factory-rigged w/matched propeller
Trailer
- NMMA Certified trailer
- Custom tandem-axle trailer
- Dual-axle brakes
- Sure Lube hubs
- Aluminum construction
- Galvanized steel components
- Stainless steel hardware
- Torsion axle suspension
- LED marker lights
- PVC loading guides
- 1,000-lb. (453.59 kg) capacity tongue jack
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.